PANASONIC TH-42PWD5
Manual de Usuario

Picture Adjustments
Item Contrast
Less More

Effect

Adjustments Selects the proper brightness and density for the room. Adjusts for easier viewing of dark pictures such as night scenes and black hair.

Notes: (1) �Colour� and �Tint� settings cannot be adjusted for �RGB� and �PC� input signal modes. (2) You can change the level of each function (Contrast, Brightness, Colour, Tint, Sharpness) for each Picture menu. (3) The setting details for normal, dynamic and cinema respectively are memorized separately for each input mode (AV(S Video), Component, RGB and PC). (4) The �Tint� setting can be adjusted for NTSC signal only during �AV (S Video)� input signal.

Brightness
Darker Brighter

Colour
Less More

Adjusts colour saturation. Adjust for nice skin colour.
Reddish Greenish

Tint (NTSC only) Sharpness

Adjusts picture sharpness.
Less More

Note: In PICTURE, there is not a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture.

Advanced Settings
Item Black extension W/B High R
Less More

Effect

Details Adjusts the dark shades of the image in gradiation.

Less

More

Adjusts the white balance for light red areas. Adjusts the white balance for light blue areas.
Less More

W/B High B W/B Low R
Less More

Adjusts the white balance for dark red areas. Adjusts the white balance for dark blue areas.
Less More

W/B Low B Gamma
Down Up

2.0

2.2

2.5

Notes: (1) Carry out �W/B� adjustment as follows. A Adjust the white balance of the bright sections using the �W/B High R� and �W/B High B� settings. B Adjust the white balance of the dark sections using the �W/B Low R� and �W/B Low B� settings. C Repeat steps A and B to adjust. Steps A and B affect each other�s settings, so repeat each step in turn to make the adjustment. (2) The adjustment values are memorized separately for each input mode (AV(S Video), Component, RGB and PC). (3) The adjustment range values should be used as an adjustment reference.

Helpful Hint (

N

/

Normalise

Normalisation)

On the remote control unit, while the �Advanced settings� menu is displayed, if either the N button is pressed at any time or the (ACTION button) is pressed during �Normalise�, then all adjustment values are returned to the factory settings.

25