6.19. Remove the S-Board
1. Remove the screw (�2 ) and remove the S-Board unit.
6.21. Remove the Plasma panel section from the Front frame (glass)
1. Remove the front frame and the plasma panel fastening screw (�8 ). 2. Remove the front frame and the stand brackets fastening screw (�6 ).
2. Unlock the cable clampers to free the cable. 3. Disconnect the couplers (S1 and S2). 4. Remove the screws (�2 ) and remove the S-Board.
3. For leaving the plasma panel from the front frame, pull the bottom of the front frame forward, lift, and remove.
6.20. Remove the Speaker L, R
1. Remove the screw (�8 ) and remove the Speaker L, R.