Tunings From Tunings main menu you can select different tunings to do. Every tuning have they own instruction window. Follow given instructions to do tunings. Clicking START will start tuning. The value will be stored only by clicking SAVE. Some of the tunings are chained and you can enter to next phase by clicking NEXT. System You select used mobile phone system from this submenu. File From settings submenu you can manually change settings of the communication port.
4.3 WinFlash
4.3.1 To start WinFlash
Connect the LocalBox to serial port of your computer, which is called COM1 or COM2. The serial ports are usually located in the back of your computer, and more precise instructions can be found in the manual accompanying the computer. It is recommended to use external power supply when transferring software to phone with WinFlash. If it is impossible to use external power supply the battery of phone must be fully charged. NOTE ! Before starting WinFlash save the short code memory places and settings of the phone to disc. You can use Benewin or Beneserv to save the SCM and settings. Switch off the phone. Plug the cable with flat connector into the connector at the bottom of the phone. Start WinFlash by double clicking WinFlash icon. After opening the main window of the WinFlash select the correct communication port.
