Volume (+/-) The Volume key is used to control the sound level when the TOSHIBA TDP490 is connected to an audio source. Channel Click on the arrows left/right to switch between pre-programmed TV channels when TV is selected as source. Focus Press the Focus key to focus the projected image after zooming to the correct size. Zoom Press the Zoom key to zoom the projected image to the desired size. Stand by The stand by key will set the TOSHIBA TDP490 in stand by mode. The lamp will turn off, and the fans will run for a little while cooling the projector before stopping. To return to normal mode, press the Stand by key once more, or press the Menu key on the remote control.
Automatic set-up The automatic set-up key will set up the projector with optimal settings for the connected source. If you want to do manual adjustments you can do this by using the menus (see section 7). Note! You can not access the screen menu system without the remote control.