Volume settings when using V-Drums sound module
For best possible sound quality, set the volume of the V-Drums sound module and TDA-700 as follows.
1.
When PHONES on the V-Drums sound generator is connected to the TDA-700�s V-DRUMS IN , set the VDrums generator�s PHONES VOLUME to the center position.
� V-Drums PHONES connection
When the V-Drums sound generator�s MASTER OUTPUT is connected to the TDA-700�s CH 1 INPUT , set the V-Drums MASTER VOLUME to the maximum position.
� V-Drums MASTER connection
2. Set the TDA-700 CH1 VOLUME to the center �5� position.
3. Adjust the TDA-700�s MASTER VOLUME to determine the overall volume level. * If the POWER INJECTION indicator turns red quite often, lower MASTER VOLUME until it turns red only occasionally. * If other sound sources are connected to CH 2, CH 3, adjust the CH2, CH3 VOLUME also.
4. Adjust the tone to your liking using the V-DRUMS SHAPE Switch and the EQUALIZER. * If you hear distortion after the adjustment, lower the CH1 VOLUME or V-Drums VOLUME until the distortion is gone. * Above also applies to cases with other sound sources connected to CH2, CH3. In that case, lower the CH2, CH3 VOLUME or VOLUME at the sound source.
