SECTION 1 SERVICE NOTE
The TCS-60DV detects rotation of both the supply and take-up side reels using the PH701 (photo reflector). Because the PH701 is mounted on the Main board, auto stop is activated and reel rotation cannot be detected when the Main board is removed. To check the operation of mechanism deck and voltage without the Main board, follow the procedure as described below. How to remove the Main board (opening the Main board) 1) Refer to page 5 �3. Disassembly�. How to enter the fast forward/rewind modes 1) Input the square wave to the TP41. (Refer to the illustration below.) 2) Press the fast forward/rewind keys. 3) Turn on the S301. How to enter the playback mode 1) Input the square wave to the TP41. (Refer to the illustration below.) 2) Press the playback key. 3) Set the S302 to the PLAY. 4) Turn on the S301. How to enter the record mode 1) Input the square wave to the TP41. (Refer to the illustration below.) 2) Press the record key. 3) Set the S302 to the REC. 4) Turn on the S301.
(Side A) PULSE 10Hz 1.6V (4.5dB) TP1 Oscillator TP41
