Operating Sequence
Before using your tumble dryer for the first time, we recommend to place a few damp cloths inside the appliance and dry for approximately 20 minutes. There may be dust inside a brand new tumble dryer.
4. Start the machine
Depress START button, the machine starts operating. To change a programme already in progress, turn the selector dial to �0�, select the new programme and then depress START button.
1. Load the laundry
Open the door by pressing the relevant button. Load the items one at a time, shaking them out loosely and close the door. Please check the laundry does not get caught between the door and filter.
START
P0918S
5. When drying is completed
P0871
2. Select the drying time or the drying programme
Turn the selector dial to the desired programme or time, the mains-on light illuminates.
The machine stops automatically. The control lights and are flashing. Release the button(s). Turn the selector dial to �0�, the mains-on light and control lights go out.
Anticrease phase
If you do not remove the laundry at the end of the programme, the machine will automatically carry out an �anticrease� phase for approx 30 mins. During this period the drum will rotate at regular intervals to avoid creasing and the buzzer will sound for 1 second every 10 seconds, unless you have depressed the BUZZER OFF button. The lights and will flash alternatively. Empty the water reservoir and clean the filter after every drying programme. A clean filter ensures correct functioning of the appliance.
60
M0027
3. Select the required options
Depress Buzzer Off and/or Low Temp. Button, if you have to dry synthetics with a timed programme.
