|
No hay comentarios de productos.
FITTING BASE BLOCK
2 two screws (PTPWH2 � 23) 1 connector (CNP32) 2 screw (PTPWH2 � 23) 3 fitting base block
Note: When installing, pull the FR belt and put around the claws as shown below.
Note: When installing, pull the capstan belt and put around the claws as shown below.
HEAD
3 erase head 2 screw (B2 � 10)
1 connector (CNP32)
5 record/playback head 6 compression spring 4 azimuth screw
�7�
|
