|
Usuarios conectados
Actualmente hay 5791 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Operating Peripheral Equipment
You can operate other manufacturers� equipment using this TV�s remote control.
Control with HDMI �HDAVI ControlTM�
Newer Panasonic audio-video products with HDMI output connections can be controlled using the TV�s remote. Limited features such as automatic switching to the TV�s HDMI input are available.
1 2 3 4 5
Power Off the external equipment
+
Connect the external equipment to the TV and
� � �
This feature is limited to models incorporating Panasonic�s �Control with HDMI�. Refer to the individual instruction manuals for compatibility information. Non-HDMI-compliant cables cannot be utilized. It is recommended that you use Panasonic�s HDMI cable. Recommended part number: RP-CDHG15 (1.5 m) RP-CDHG30 (3.0 m) RP-CDHG50 (5.0 m)
Press both buttons simultaneously for more than 3 seconds.
� �
Release the buttons when the equipment selection buttons start flashing.
Automatic input switching
When �Ctrl with HDMI� is set to �On�, at the start of HDAVI control compatible equipment�s playback, the TV�s input automatically switches to the input corresponding to the playback equipment. If using DIGA operation, the TV�s input automatically switches to DIGA and the DIGA menu is displayed. If the TV�s power is Off, it is automatically switched On.
with HDMI �HDAVI Control � Advanced Operating Peripheral Equipment
�
Select the equipment
with the equipment selection button
The selected button remains lit (other buttons are not lit).
Power on link
When �Ctrl with HDMI� is set to �On�, the TV is automatically turned on and switched to the appropriate HDMI input whenever HDAVI control compatible equipment is initially turned on and Play mode is selected.
Input the equipment�s 4-digit remote control code (p. 37-38)
Power off link
When �Ctrl with HDMI� is set to �On� and the TV is turned off, the connected HDAVI control compatible equipment is also automatically turned off. DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
�
Operate the equipment with the remote control (p. 36)
�
The external equipment turns On.
If the equipment does not operate with remote control
� � �
When your equipment has a single code Input the remote control code again When your equipment has multiple codes Change the code with above and test again
� � �
Caution The TV remains on even if the �Control with HDMI� compatible equipment is turned off.
TM
For equipment connection details, see p. 22. Default setting is �On�. If no HDMI equipment is connected or standard HDMI equipment (non- �Control with HDMI�) is used, set to �Off�. (see below)
Note Before using HDMI control functions, the connected equipment must also be set. For details, see the operation manual for each equipment.
1
Display menu
3
Select �Other adjust�
Setup CH scan Language
ALL
Caution Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
select
To find a code not listed in the code list
This procedure searches all codes and is called the �sequence method.� After step above, change the code and When the correct code is found test
store change
Program channel Input labels CC Other adjust
next
2
Select �Setup�
Picture Audio Timer Lock Setup
Menu
4
Select �Ctrl with HDMI�
Other adjust Auto power on Prog-out stop Ctrl with HDMI Power save Off Off On Standard
select
Select �On� or �Off�
select
Operate the equipment with the remote control (p. 36)
5
change Press to exit or return to previous screen
� �
20
Repeat until the code is found It may take many attempts before the correct code is found
next
21
|
|
|
> |
|