WHIRLPOOL TAWB600EQ0
Manual de Usuario

OP E RA T IN G YO UR WA S H E R

4. Turn the Load Size Selector to the setting that corresponds with the size of your wash load and the type of fabric being washed. � See pages 12 and 13 for loading suggestions. � To change the load size setting after the washer has started to fill, turn the Selector to the desired new setting.

MEDIUM SMALL LARGE

WATER SAVER

LOAD SIZE

5. Select a Wash-Rinse Temperature with the Water Temperature Selector. Match the water temperatures with the type of fabric and soils being washed. � See page 14 for water temperature guidelines.

WARM COLD COLD COLD HOT COLD

WASH RINSE

TEMPERATURE

6. Push in the Cycle Control Knob and turn it clockwise to the wash cycle you want. See pages 7 to 9.

7. Pull out the Cycle Control Knob to start the washer.

8. (OPTIONAL STEP) Add measured liquid fabric softener to the final rinse water. See page 10.

Stopping/restarting your washer
� To stop the washer at any time, push in the Cycle Control Knob. � To restart the washer, close the lid (if open) and pull out the Cycle Control Knob.

6