WHIRLPOOL TAWB600DQ0
Manual de Usuario

Using

Rinse and Spin

When using extra detergent for heavily soiled clothes, or washing special-care items, you may find an extra rinse and spin is needed. 1. To add an additional rinse, push in the Cycle Control Knob and turn clockwise to any of the dots, as illustrated. 2. Pull out the Cycle Control Knob. The washer fills to selected load size, agitates, drains, and spins.

Using

Drain

and Spin

Understanding

normal

washer
During drain

sounds

Your new washer may make sounds that your old one didn�t. Because the sounds are unfamiliar, you may be concerned about them. Don�t be; most of them are normal. The following describes some of the sounds you may hear and what causes them.

The rate that water is drained from your washer depends on your installation. If water is drained quickly from the washer, you may hear air being pulled through the pump. This happens during the end of draining.

During

washing

After

When you select a small load size setting for a small wash load, your washer has a lower water level. With this lower water level, you may hear a clicking sound from the upper portion of the agitator.

When the cycle changes from draining to spinning, you may hear gears engaging.

drain

and before

spin

9