ZANUSSI TA850
Manual de Usuario

4.2.8. End of the programme
When the chosen programme is over, the washing machine stops automatically and the programme selector stays on the stop « » or «rinse hold » position. The programmes end : � by a spinning or a draining (for all the washing programmes) by selecting the wanted position on the spinning speed variator (if you have not pressed the «rinse hold» pushbutton). � by a rinse hold (for all the washing programmes) if you have selected the «rinse hold » pushbutton. You can finish these programmes by a spinning by selecting the wanted position on the spinning speed variator and releasing the «rinse hold » pushbutton.

At the end of the cycle, allow the On/Off « » pushbutton to come out to switch the washing machine off. Release any other pushbuttons that are pressed in. Pull out the electricity plug and close the water supply tap. Note: we recommend that you should leave the cover and the drum open after use to air the washing drum.

4