DISASSEMBLY INSTRUCTIONS
1. Remove machine screws M4.0 x 8.0 (1 to 8) from the side panels. Remove tapping screw 3.0 x 8.0 (9 to 12) from the back panel. Refer to Figure No. 1.
12 4 11
10
8 1 3
9
2
7 6
Figure No. 1
5
2.
Pull both sides of the TOP COVER slightly outwards 13 and tilt approx. 35 ° and then remove in the direction as indicated by the arrow 14. Refer to Figure No. 2.