Problem solving guide
What to do if, . . . ?
. . . the drum door opens during the drying cycle?
Cause . . .
The machine has overheated. The temperature limiter opened the drum door and caused the machine to turn off automatically. Possible reasons for overheating: � The lint filter in the door is clogged. � The vent duct is blocked. � The vent aperture (e.g. louvred window vent, wall vent) is blocked. This may not be a problem. A dual filter system with two seals is used to prevent lint from becoming deposited in the heat exchanger.
Remedy . . .
Before restarting the program, proceed as follows: � Release the ON/OFF button. � Clean the affected part of the machine. � Turn on the machine again. � Reselect the terminated program. � Press the �Start� button. If the drum door opens again, the Miele Service Dept. should be contacted. These two seals may occasionally cause condensed water to form on the door. Laundry coming into contact with these drops of water will dry within in a few minutes. Check that the heat exchanger door has been replaced correctly. If necessary, remove and replace it. See next page. See next page.
. . . drops of the water appear along the upper edge of the drum door?
. . . after cleaning the heat exchanger, water leaks from the machine? . . . the interior drum light fails to function? . . . you have to open the door in the event of a power failure?