CD MODE
Clearing preset tracks In order to clear individual tracks from the list of favourite tracks for a CD,
� Use the
or button 7 to change the input position. � Press the OK button 5 to store the name. Clearing a CD name
� switch on TPM; � select the track you wish to clear; � hold down the soft key 4 with the display allocation �CLR� for approx. two seconds. �TR CLR� appears briefly on the display and the track is cleared from the list. Clearing the list of favourite tracks for a CD You can also clear the entire list of favourite tracks for a CD. The CD whose favourite tracks you wish to clear must be inserted at the time of clearance.
� Listen to the CD whose name you wish
to clear.
� Press the MENU button 8. � Press the soft key 4 with the display
allocation �CD�.
� Hold down the soft key 4 with the display allocation �CD� until �CD CLR� appears on the display. The CD name has now been cleared.
� Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored. Clearing all CD names
� Switch on TPM. � Hold down the soft key 4 with the display allocation �CLR� for approx. five seconds. �CD CLR� appears briefly on the display and the list is cleared.
� Listen to a CD. � Press the MENU button 8. � Press the soft key 4 with the display
allocation �CD�.
Naming CDs
To make it easier for you to recognise your CDs, the car radio offers an individual name option for 30 CDs. The names should have a maximum of eight digits. If you attempt to allocate more than 30 names, �FULL� will appear on the display. Entering/altering CD names � Listen to the desired CD.
� Hold down the soft key 4 with the display allocation �ALL� until �MEMO CLR� appears on the display. All CD names have now been cleared.
� Press the OK button 5 to return to the
previous menu level or the MENU button 8 to leave the menu altogether. The settings are now stored.
� Press the soft key 4 with the display
allocation �NAME�. This brings you to the edit mode. If the CD you have selected is not yet known to the unit, eight underlines will appear on the display. The current input position flashes.
� Use the
or buttons 7 to choose your characters. Should a position remain blank, you select the underline.
