PANASONIC SXPR604
Manual de Usuario

Part IX

Sound Edit

FILTER ENVELOPE TOUCH & KEY FOLLOW
Specify how the filter envelope (curve) changes relative to touch or note pitch.

1. Use the PAGE buttons to view the 4/4 display.
� The display looks similar to the following.

3. Use the TOUCH � and � buttons to modify
how the respective filter envelopes change relative to touch.
� Use the TIME � and � buttons to specify the time change, and the LEVEL � and � buttons to specify the level, relative to touch. � At a � setting, the softer the keys are played, the greater the change. At a + setting, the harder the keys are played, the greater the change.

4. Use the ENVELOPE KEY FOLLOW � and � 2. Use the buttons to the left of the display to
select a tone. buttons to modify how the respective filter envelopes change relative to note pitch.
� Adjust the respective slopes for attack (ATK), decay (DCY) and release (RLS). Use the CENTER � and � buttons to specify the center of the bend slope by note name.

Amplitude Edit
Adjust the settings related to the volume of the sound.

LEVEL
1. On the SOUND EDIT menu, select AMPLITUDE.
� The display looks similar to the following.

ENVELOPE
Specify how the volume changes over time, from the time the key is played to the time the sound dies out.

1. Use the PAGE buttons to view the 2/3 display.
� The display looks similar to the following.

2. Use the buttons to the left of the display to
select a tone.

2. Use the buttons to the left of the display to
select a tone.

3. Use the LEVEL � and � buttons to select the
volume. Sound Edit

3. Adjust the settings for the volume envelope.
� Use the buttons below the display to set the corresponding values. The envelope is created on the display as you input the settings. � Use the SUSTAIN PEDAL � and � buttons to select the type of sustain. LONG: Extend the release time of the sound. HOLD: Maintain the key-pressed condition.

4. Use the TOUCH � and � buttons to set the
amount of volume change in relation to how hard the keyboard is played.
� At a � value, the softer the keyboard is played, the louder the sound. At a + value, the harder the keyboard is played, the louder the sound.

5. Use the CURVE � and � buttons to select the
type of volume curve depending on touch.

6. Use the LEVEL KEY FOLLOW � and � buttons to change the respective key follow settings.
� Use the SLOPE � and � buttons to adjust the bend slope. Use the RANGE � and � buttons to specify the pitch range by note name.

4. Repeat steps 2 and 3 for the other tones, as
desired.

7. Repeat steps 2 to 6 for the other tones, as
desired.

116
QQTG0665