Inicio >>
PHILIPS >>
SW7000SA/01S Manual de Servicio
0 artículo(s) en Su carrito
Opiniones de los clientes
No hay comentarios de productos.
TEXT_PDF_SNIPPET
2-1
DISASSEMBLY INSTRUCTIONS
Dismantling the Grille Assembly & Speaker Driver
1. Place the Subwoofer Box as shown in the Picture 1 and use a screw driver to force open the Grille Assembly. Caution: Take care the surface when take out the Grille Assembly of Subwoofer 2. Place the Subwoofer Box as shown in the Picture 2 and loosen 4 screws A to remove the Speaker Driver.
A
Picture 1
Picture 2
Dismantling the Front Assembly
1. Place the Subwoofer Box as shown in the Picture 3 (Bottom view) and use a screw driver to force open the front assembly. Caution: Do not break the bundle of wires to the front. Take care the surface when take out the front panel of subwoofer
Dismantling the Rear assembly
1. Loosen 9 screws B as shown in the Picture 4 (Rear View) to pull out the Printed Circuit Board assembly.
Caution: Do not break the bundle of wires to the front.
B
WARNING: THERE IS ONLY A LED BETWEEN FRONT PANEL AND WOOD BOX. IF NOT NECCESSARY, PLEASE DO NOT TRY TO OPEN THE FRONT PANEL!!!
