KENWOOD SW3HT
Manual de Servicio

POWER SUBWOOFER

SW-3HT
SERVICE MANUAL
© 1997-11/B51-5394-00 (K/K) 1396
Cloth frame assy (B06-1144-08) Power knob (REAR) LED (K29-0579-08) (B30-1822-08) Speaker terminal (E21-0279-08) Slide switch voltage * (S31-)

SERIAL NO.

INPUT FROM AMPLIFIER + POWER LINE
ON OFF
NORMAL REVERSE

R

�

�

L

+

PHASE

LEVEL CONTROL

+

R

�

�

L

+

TO SPEAKERS

Badge (B43-0847-04)

Cord bushing (J42-0234-08)

AC cord * (E30-)

Slide switch phase (S62-0207-08)

Level control knob (K29-0576-08)

* Refer to parts list on page 7.

SPECIFICATIONS
Type .......................................... Subwoofer system with built-in amplifier [Amplifier] 100 watts RMS, at 4 W, from 20 Hz to 200 Hz with no more than 0.09 % total harmonic distortion. Phase Switching ..................... NORMAL, REVERSE Input Sensitivity & Input Impedance RCA-type pin-plug jack ....... 45 mV (12 kW) Push-type terminals ............ 0.7 V (5 kW) Supply Voltage ....................... U.S.A. and Canada AC 120 V Other countries AC 110 V - 120 V/ AC 220 V - 240 V Rated Power Consumption .. 110 W [Speaker] Enclosure ................................. Bass-Reflex, Floor Standing Type Speaker Units ......................... 250 mm Cone type Nominal Impedance .............. 4 W Dimensions .............................. Width : 300 mm (11-13/16") Height : 420 mm (16-9/16") Depth : 444 mm (17-1/2") Net Weight .............................. 16 kg (35.3 lb) Supplied Accessories ............ Pin-plug cord � 1 .................................................... Pads (� 4)

NOTE: DO NOT REMOVE THE GRILLE. Note: KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.