DISASSEMBLY INSTRUCTIONS
Dismantling the Speaker Grille & Speaker Driver 1. Place the Subwoofer Box as shown in the Picture 1 and use a screw driver to force open the Speaker Grille. Caution: Take care the surface when take out the Speaker Grille of Subwoofer
2. Place the Subwoofer Box as shown in the Picture 2 and loosen 4 screws A to remove the Speaker Driver.
A
Picture 1
Picture 2
Dismantling the Front Assembly
1. Place the Subwoofer Box as shown in the Picture 3 and use a screw driver to force open the front assembly.
Dismantling the Rear assembly
1. Loosen 10 screws B as shown in the Picture 4 (Rear View) to pull out the Printed Circuit Board assembly.
Caution: Do not break the bundle of wires to the front. Take care the surface when take out the front panel of subwoofer
Caution: Do not break the bundle of wires to the front.
B
Picture 3
WARNING: THERE IS ONLY A LED BETWEEN THE FRONT PANEL AND WOOD BOX. IF NOT NECCESSARY, PLEASE DON�T TRY TO OPEN THE FRONT PANEL!!!
