Playing 23
Read and follow the steps below to play a tape.
1
Turn on the TV and set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to.
1 2
Turn on the TV. Insert a tape.
2
Insert a tape in the VCR. The POWER and CST.IN lights will appear. If the tape�s record tab has been removed, the VCR/TV light will appear and playback will begin automatically.
POWER VCR/TV EJECT
6
1 4 7
SPEED
2 5 8 0
QUICKFIND
3 6 9 +100
SEARCH TIME INDEX CHANNEL
3
If playback does not start automatically, press the VCR/TV button to put the VCR in VCR position (the VCR/TV light will appear). Then, press the PLAY button.
SLOW
4
Press the STOP button to stop playback.
MENU
DISPLAY
EXIT
COUNTER
3
5 6
Press the REWIND button to rewind the tape.
5 4
REWIND
RESET / PLAY
MEMORY F.FWD
RECORD
/ STOP
PAUSE/STILL
When the tape has finished rewinding, press the EJECT button to remove the tape.
Helpful Hints
� If the tape you want to play is already in the VCR, make sure the VCR power is on and the VCR is in VCR position. (Press the VCR/TV button so that the VCR/TV light appears.) Then, press the PLAY button. � Other playback options and features are on pages 34 - 41.
