Option Selections
Select either Air Dry or Heat Dry for each wash cycle. You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
3. Close and latch the door. The Cycle Control knob will not advance if the door is unlatched. NOTES:
s
To cancel the delay, turn the Cycle Control knob to the desired cycle. Rinse Only and the Light wash cycles cannot be delayed.
s
Air Dry
Select this option to dry dishes without heat and save energy. The dishes take longer to dry and some spotting can occur.
s s
IMPORTANT: Operate your dishwasher only when you are at home. If your home is equipped with a water softener, do not start the dishwasher during the regeneration of the softener.
Drying System
For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying. During drying, you can see steam escaping through the vent at the upper left corner of the door. This is normal as the heat dries your dishes.
Heat Dry
Select this option to dry dishes with heated air. For best drying results, use a liquid rinse aid and heated drying.
IMPORTANT: The vapor is hot. Do not touch the vent during drying. NOTE: Heat Dry is an option for all cycles except Rinse Only.
Overfill Protection Float
The overfill protector (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.
Delay Hours
Select this option to run your dishwasher at a later time or during off-peak hours. To delay the start 1. Close the door. 2. Select a wash cycle and option. Press the desired cycle. Turn the Cycle Control knob clockwise to the number of hours you want the dishwasher to delay the start.
Check under the float for objects that may keep the protector from moving up or down.
The dishwasher starts the cycle in the selected number of hours. You can add items while the time is counting down.
