Notes: - Should all video signal paths be in use on selection of AV because Copy is active for example, this situation is identified and the TV switches over to the next technically possible AV position. - On selection of the country Italy in the menu, an AV-RGB signal with blanking signal (Pin 16) has priority. - The blue screen background does not appear in all AV settings. AV socket configuration (dependent on the TV receiver) Socket Input AV1 RGB Output Switching Signal 6/12V (switching voltage) +1V (fastblanking) evaluation 6/12V 6/12V 6/12V + 1V evaluation 6/12V 6/12V 5V generated from sync
9. Changing the Picture Format
In AV mode, the picture format can be switched over with remote control button " " or the yelllow button in dependence of the size of the picture tube. The picture format is changed between 4:3 and 16:9 in AV mode and on the programme position with Peribit. This status is indicated by the switching voltage 6/12V applied to pin 8 of the AV 1 and AV 2 socket. - 4:3 format 12V - 16:9 format 6V (Necessary for 16:9 camcorder playback to compensate for the vertical extension because supply of the 6/12V switching voltage is not provided).