Manual Dubbing (From DVD To VCR)
Dubbing A Part Of A Disc
You can dub the selected scenes on a tape to the DVD disc, starting and stopping wherever you wish.
� Turn on the unit. � Turn on the TV and select the video channel (or AV mode). � Slide the TV/CABLE/DBS/DVD switch to DVD.
REC VCR/DVD MODE DUBB. VCR } DVD
1 For DVD deck
Load a disc you want to dub. For VCR deck Load a cassette with the record safety tab intact. 2 Press VCR}DVD to select the dubbing direction. 3 Prepare the DVD deck for dubbing. A Press VCR/DVD repeatedly so that the DVD lamp lights up on the unit. B Locate the point from where you want to start dubbing, then pause playback by pressing the following buttons: 4, 5, 3, 8, 9 4 Prepare the VCR deck for dubbing. A Press VCR/DVD repeatedly so that the VCR lamp lights up on the unit. B Press REC MODE repeatedly to set the recording mode. C Press 7 and 9 simultaneously so that the VCR deck enters the Record Pause mode.
5 Press and hold DUBB. for more than 2 seconds to start the
DUBB. Lamp
83 U
59 7
dubbing. The dubbing (DUBB.) lamp lights up on the unit. 6 Press 8 to stop recording on the VCR deck. Then press VCR/ DVD, and press 8 to stop playback on the DVD deck. NOTES:
� It is not possible to start dubbing if the unit retains a memory of the resume points. Press 8 twice to clear the resume points. � There may be a discrepancy of several seconds between where you intend dubbing to start, and where it actually starts. � The superimposed indication during the operation or dubbing is not recorded. � When the end of the tape is reached during dubbing, the tape is ejected and both deck stops. � When the progressive mode is set, �}DVD� does not light up on the front display panel. Press PROGRESSIVE SCAN so that video output indicator ( ) lights off on the front display panel. � It is not possible to perform other operations like Live Memory Playback. Check the recorded program on the disc after dubbing.
