SONY SPT-M128CE
Manual de Servicio

English

Features
The SPT-M124/M122CE/M124CE/M128CE black and white video camera is designed for use in a monitoring system. � High resolution and high sensitivity with a 1/3 inch Hyper HAD� (Hyper Hole Accumulated Diode) CCD (Charge Coupled Device) for the image device � CCD-IRIS function � AGC (Automatic Gain Control) � AC line lock (SPT-M124/M124CE/M128CE) � Can be used with C or CS mount lenses � Compatible with DC controlled or video signal controlled auto iris lenses � LEVEL and BLC (Back Light Control) adjustment for various lighting conditions � Isolated power circuit * Hyper HAD� is a registered trademark of Sony Corporation.

Notes on Use
Power supply
� The SPT-M124 must always be operated with a UL-listed 24 V AC, 60 Hz Class 2 power supply. In the U.S.A, use a power supply which is UL listed. In Canada, use a power supply which is CSA Certified. � The SPT-M124CE must always be operated with a 24 V AC, 50 Hz power supply. � When connecting the transformer, be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and/or damage to the video camera. � Ground the unit or an irregular voltage may be generated in the AC power cord and may cause malfunction and/or damage to the video camera. � The SPT-M128CE must always be operated with a 220 to 240 V AC, 50 Hz power supply. � The SPT-M122CE must always be operated with a 12 V DC power supply.

Handling of the unit
Be careful not to spill water or other liquids on the unit, or to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail, or to be a cause of fire or electric shock.

Operating and storage locations
Avoid viewing a very bright object (such as light fittings) for an extended period. Avoid operating or storing the unit in the following locations. � Extremely hot or cold places (operating temperature �10°C to +50°C; 14°F to 122°F, however, we recommend that the unit be used within a temperature range of �5°C to +40°C; 23°F to 104°F) � Damp or dusty places � Where it is exposed to rain � Where it is subject to strong vibration � Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.

Handling of the lens
As the lens could be damaged if not attached properly, make sure to see the section �Suitable lenses� before attaching it.

Care of the unit
� Remove dust or dirt on the surface of the lens or CCD with a blower. � Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent, then wipe dry. � Avoid the use of volatile solvents such as thinners, alcohol, benzene, and insecticides. They may damage the surface finish and/or impair the operation of the camera. In the event of any problems with the operation of the camera, contact your Sony service representative.

1-2

SPT-M124 SPT-M122CE/M124CE/M128CE