3-2. HANDSET
[Setting the Test Mode] Power on with press the * key and the # key simultaneously for one second, and the Test Mode is set. * Press the SPEED DIAL key (SPP-ID300) or INTERCOM key (SPP-ID400) in Test Mode, EEPROM (IC501) is been initialize, and it beeps confirm tone. * LIQUID CRYSTAL DISPLAY turns on/off, when press the # key. [Releasing the Test Mode] To release the Test Mode, perfome as follows: � Press the TALK key or REDIAL/PAUSE key. � Turn off the power (disconnect and reconnect Battery connector). � Set the haundset to charge on the base unit (except Test Mode 10). [Changing the Test Mode step] Press the each key of the Test Mode No. [Changing the Channel] Press the CHANNEL key. * The channel is back to initial channel (6 CH), when Test Mode step is changed. � Channel Rotation
