SONY SLVE285
Manual de Servicio

SPECIFICATIONS
System Channel coverage � SLV-E130/E230AE/E230CP/E230VP/ E285VC/E295CP/E295VC/E430AE/E430CP/ E430VC/E430VP/E530CP/E530VC: PAL (B/G) VHF E2 � E12 (VHF Italian channel A to H) UHF E21 � E69 CATV S01 � S05, S1 � S20 HYPER S21 � S41 � SLV-E177/E180/E380/E477/E480: PAL (D/K, B/G) VHF R1 � R12, E2 � E12 UHF R21 � R69, E21 � E69 CATV S01 � S05, S1 � S20 HYPER S21 � S41 � SLV-E230EY: PAL (I) VHF A-J UHF B21 � B69 CATV S01 � S05, S1 � S20 HYPER S21 � S41 � SLV-E230UY/E295UX/E530UX: PAL (I) UHF B21 � B69 � SLV-E285B/E430B/E530B: PAL (B/G) VHF E2 � E12 (VHF Italian channel A to H) UHF E21 � E69 CATV S01 � S05, S1 � S20 HYPER S21 � S41 SECAM (L) VHF F2 � F10 UHF F21 � F69 CATV B � Q HYPER S21 � S41 RF output signal UHF channels 21 � 69 Aerial out 75-ohms asymmetrical aerial socket Inputs/outputs � SLV-E130/E177/E180EG/E230EY/E230UY/ E380EG/E477/E480EG: � LINE-1 (TV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 � SLV-E180EE/E380EE/E480EE: LINE-1 IN VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) Input level: 327 mVrms Input impedance: more than 47 kilohms LINE-2 IN (SLV-E380EE) VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) Input level: 327 mVrms Input impedance: more than 47 kilohms LINE OUT VIDEO OUT, phono jack (1) Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO OUT, phono jack (1) Standard output: 327 mVrms Load impedance: 47 kilohms Output impedance: less than 10 kilohms � SLV-E230AE/E230CP/E230VP/E285VC/ E430AE/E430CP/E430VC/E430VP: � LINE-1 (TV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 DECODER/� LINE-2 IN (SLV-E230CP, E285VC, E430VC/CP) � LINE-2 (SLV-E430AE/VP) 21-pin Video input: pin 20 Audio input: pins 2 and 6 � SLV-E285B/E430B: � LINE-1 (TV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 DECODER/� LINE-2 IN 21-pin Video input: pin 20 Audio input: pins 2 and 6 � SLV-E295CP/E295VC/E530B/E530CP/ E530VC: � LINE-1 (TV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 DECODER/� LINE-3 IN 21-pin Video input: pin 20 Audio input: pins 2 and 6 LINE-2 IN VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) Input level: 327 mVrms Input impedance: more than 47 kilohms � SLV-E295UX/E530UX: � LINE-1 (TV) 21-pin Video input: pin 20 Audio input: pins 2 and 6 Video output: pin 19 Audio output: pins 1 and 3 � LINE-3 IN 21-pin Video input: pin 20 Audio input: pins 2 and 6 LINE-2 IN VIDEO IN, phono jack (1) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jack (1) Input level: 327 mVrms Input impedance: more than 47 kilohms General Power requirements 220 � 240 V AC, 50 Hz Power consumption 20W Operating temperature 5 �C to 40 �C Storage temperature �20 �C to �60 �C Dimensions Approx. 355 � 96 � 285 mm (w/h/d) including projecting parts and controls Mass Approx. 3.9 kg Supplied accessories Remote commander (1) R6 (size AA) batteries (2) Aerial cable (1) Design and specifications are subject to change without notice.

SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer: 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. 2. Check the interboard wiring to ensure that no wires are �pinched� or contact high-wattage resistors. 3. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

4. Look for parts which, though functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. 5. Check the B+ voltage to see it is at the values specified.

�2�