Step 2 : Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries by matching the + and � on the batteries to the diagram inside the battery compartment. Insert the negative (�) end first, then push in and down until the positive (+) end clicks into position. Getting Started
Using the remote commander
You can use this remote commander to operate this DVDVCR and a Sony TV. Buttons on the remote commander marked with a dot (�) can be used to operate your Sony TV. If the TV does not have the symbol near the remote sensor, this TV / remote commander will not DVD·VIDEO operate the TV.
Remote sensor
To operate the DVD player the VCR your TV
Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT DVD and point at the remote sensor at the DVD-VCR DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor at the DVD-VCR TV and point at the remote sensor at your TV
Notes � With normal use, the batteries should last about three to six months. � If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. � Do not use a new battery with an old one. � Do not use different types of batteries. continued Setting up the remote commander