Installation
For basic installation, see the quick start guide that came with your Wireless TV Link.
3
Enjoy
Install the remote control blaster cord
DC 9V ON/OFF
1 Switch off the transmitter (A).
1234
2 Connect the remote control blaster cord (E) to the IR socket. 3 Position the blaster light in front of the video source. See the user manual of the video source for the exact location of the IR sensor on the front panel.
DC 9V ON/OFF
4 Switch on the transmitter (A). 5 Take the remote control of a video source with you. 6 Go to TV2. 7 Switch on TV2.
DC 9V ON/OFF
8 Switch on the receiver (B). 9 Select the correct SCART input on TV2. 10 Operate the video source with its remote control.
