PANASONIC SL-CT580V
Manual de Usuario

Button control guide (Listening to the Radio)
Slide in direction of arrow. HOLD
(Function lock) <
HOLD 1 HOLD >

References to the remote control apply only to SL-CT582V . < > indicates the buttons for the remote control.
Set to �MONO� when there is noise during FM reception. Sound becomes monaural, but noise is reduced. MONO/ST, FM MODE

(Slide in opposite direction to cancel.)
�The unit and remote control each have independent HOLD switches.

Select stereo or monaural FM

Each time you press [MONO/ST, FM MODE]
MONO
No display (stereo)

Radio on/ Change band

Press.
RADIO/BAND < RADIO > �Press again to change the band. Each time you press the button: () FM AM

Each time you press [EQ]
S-XBS S-XBSr
Enhanced S-XBS

9, i

Press.
�Press and hold to scan the stations rapidly. ��TUNED� appears when tuned. �When �M� is displayed, press [TUNING MODE] to cancel it.

Sound quality

EQ

Boosts the bass

No display (canceled)

Select the station

<9> (Forward) :, j <:> (Backward)

�The effect may differ with different kinds of music.

1 107 10

FM

M

107 10

FM

Press. (Main unit)

Turn off Volume control (0�25) Receive an FM broadcast clearly
i, VOL (Increase) j, VOL (Decrease)

�, OPR OFF < RADIO >

Press and hold. (Remote control) Press.
Set to �CITY� if reception is poor or if there is interference from another station.

To obtain good reception
AM
Try various directions to obtain optimum reception.

%CITY/NOR

Each time you press and hold [%CITY/NOR]
CITY
No display (canceled)

FM
The headphone/earphone cord is also the FM antenna, so extend it instead of leaving it coiled.

Storing stations in memory
Store the frequencies of up to 30 stations; 20 FM and 10 AM. 1 Slide [HOLD1] in the opposite direction to the arrow to cancel. 2 Press [RADIO/BAND] to turn the tuner on and change the band. 3 Press [TUNING MODE] to display �M�.
FM M

Erasing a memorized station
1 Perform steps 1 to 3 for �Storing stations in memory� (�left). 2 Press [:, s] or [9, r] to select the memorized station to be erased. �Press and hold to change incrementally. 3 Press [RECALL, MEMORY]. The frequency number flashes. 4 Do each of the following within 10 seconds. 1Press and hold [RECALL, MEMORY] until �- - - -� flashes.
FM M

1 107 10
4 Press [RECALL, MEMORY].
FM

1 -- -M

1 98 00
5 Do each of the following within 10 seconds. 1Press [:, s] or [9, r] to select the frequency. 1�Press and hold to scan the stations rapidly. 2Press [RECALL, MEMORY]. 3Press [:, s] or [9, r] to select the memory number. 1�Press and hold to change incrementally.
FM M

2Press [RECALL, MEMORY].

When using overseas
Change the frequency step according to the area. 1 Press [RADIO/BAND] to switch on the power. 2 Press and hold [RADIO/BAND] until the step appears.
FM

1 106 00
4Press [RECALL, MEMORY] to confirm the setting.

U0 2

Listening to a memorized station
1 Perform steps 1 to 3 for �Storing stations in memory� (�above). 2 Press [:, s] or [9, r] to select the memorized station. �Press and hold to change incrementally. ��TUNED� appears when tuned. 3 Adjust the volume.

3 Do each of the following within 10 seconds. 1Press [:, s] or [9, r] to select the step. 1Each time you press [:, j] or [9, i]

U0.2
FM 0.2 MHz, AM 10 kHz (original setting)

U0.1
FM 0.1 MHz, AM 10 kHz

E
FM 0.05 MHz, AM 9 kHz

2Press and hold [RECALL, MEMORY] until the frequency appears to confirm the step. �To return to the previous frequency step Repeat the above procedure. �Changing the step erases the stations you stored in memory.

6

RQT7858