Internet A/V Module � Service Hints
The Internet A/V Module StreamIOm G1.0/LinX is not intended to be repaired on component level. Only the complete Printed Board Assembly and the Wireless LAN Card are available as service spare part. These articles can be ordered with the following codenumbers: StreamIOm G1.0/LinX PBAS .......3103 308 67790 Wireless LAN Card.......................9307 008 01371 Important note: When replacing the Internet A/V Module the set 12NC must be programmed into the module before returning the set to the customer !! The 12NC depends on the stroke version of the set and can only be programmed with the help of an external application � the so-called Factory Test Server.
Factory Test Server Application
StreamIOm G1.0/LinX Internet A/V Module
This module is not intended to be repaired on component level. Circuit Diagrams and Printed Circuit Board drawings are published for orientation only. In case of defects please replace the entire module. Modules can be ordered with codenumber �3103 308 67790�.
The Factory Test Server serves two purposes: 1. To test the Internet streaming of the module, without having a broadband Internet connection present. 2. To program the SET 12NC into the module after replacement. The Factory Test Server Application is available at dedicated workshops, only. Basic requirements: � PC running Windows NT4 Service Pack 6 or higher, Windows 2000, or Windows XP Pro � 400MB hard disk space � Ethernet network card � Ethernet crossover cable or Ethernet hub with standard patch cable � Wireless Access Point � Mouse � Monitor � CD-ROM drive (for installation)
For detailed instructions on how to install, setup and use this application please refer to the �Factory Test Server Application Manual�, included on the CD-ROM.