Getting Started
flashes slowly to indicate when you have new calls. You may review the call log while in standby mode or in REVIEW CALLS mode. Simply push one of the REVIEW keys to scroll through each call record � the Caller ID information is displayed on the screen, and if you are in REVIEW CALLS mode the date, time, and phone number are announced. If you push the reverse REVIEW Key you will scroll from the last call received backwards to the oldest call in the call log. If you push the forward REVIEW key you will scroll beginning with the oldest call in the log to the last one. If you hold down either review key for more than 2-seconds, the unit will announce the number of new calls in the call log followed by the date, time, and phone number of each call. You can clear a call by pressing the CLEAR key while the call is displayed on the screen. Holding down the CLEAR key for 2-seconds clears all the calls from the call log. Entering a Telephone Number Manually Do you need to enter a number manually? You can record names and outgoing messages for any number that is already stored in the call log, or stored in the list of calls with recorded names or messages. If the number you want is not already stored in memory, you can enter it