CARE AND CLEANING
Some household cleaning chemicals may affect the inside surfaces and plastic shelves resulting in splitting or cracks occurring. When cleaning all plastic parts inside this refrigerator, only use diluted dishwashing liquid(soapy water). Make sure that all plastic parts are thoroughly rinsed with water after cleaning. 1. Remove the shelves and pockets from the cabinet and door. Wash them in warm soapy dishwashing water; rinse in clean water and dry. 2. Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to wipe off soapy water. 3. Wipe the exterior with a soft cloth each time it is soiled. 4. Clean Magnetic door seal with a toothbrush and warm soapy dishwashing water. 5. Whenever the refrigerator is moved to clean or repositioned, the Evaporating pan should be removed and cleaned.
Evaporating pan; How to remove
Evaporating pan
Move the Evaporating pan to pull it toward yourself.
How to set
1. Make sure the back end of the Evaporating pan rests securely on the claw. Otherwise water will leak. 2. Set the Evaporating pan so that the two protrusions come through its corresponding holes.
Holes
Protrusion
Evaporating pan Claw Holes
NOTE:
� Do not use polishing powder, benzine, hot water etc. � If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result. � Wipe any food oils adhered to plastic components as they can cause cracking of the plastic surface.
Replacing method of the lamp bulb
1. Unplug the refrigerator first to prevent electric shock. 2. Replace the lamp bulb with the same type. base E14, MAX 10W, T-20
Switching off your refrigerator
If you switch your refrigerator off when you are going away for an extended period, remove all food, clean the interior thoroughly. Remove the power cord plug from the power socket and leave all doors open.
