By simultaneously pressing the buttons "INPUT" and "+" or "-", you start the input search for sockets 1 - 5 at the back of the modulator. With the "+" button you choose a higher input number. Holding this button down initiates fast search, continually cycling from the beginning. With the "-" button you choose a lower input number. Holding this button down initiates fast search, continually cycling from the beginning. When both buttons are released the selected input is stored. Now you have to choose the infra-red transmission channel for the selected input.
Choosing the IR transmission channel Switching a channel off
By simultaneously pressing the buttons "CHANNEL" and "+" or "-" you start the search for the infra-red transmission channel which is to be assigned to the input. To switch a channel off, search through the transmission channels as described above. The OFF position is the next channel above "£ ¡" or below "ºº" (depending which way you go). The display will indicate "ºF." instead of a channel number and the corresponding LED will go off. NB: It is important that any unused channels are switched off. Any channel left on, but unused, will reduce the radiator coverage area accordingly. (See the section on calculating the radiator coverage area in the user manual supplied with the radiator). 12
