Connecting the digital transceiver
Insert the digital transceiver into the slot of your home theater unit.
e.g. Do not insert or remove while the home theater unit is on.
AV OUT
6 SUBWOOFER 5 CENTER 2
R
DIGITAL TRANSMITTER
COMPONENT VIDEO OUT
FM ANT 75
Digital transceiver§ Insert fully until you hear a click.
PB
Y
LOOP
S-VIDEO OUT
AM ANT
1
L
4
R
3
L
PR
FRONT
SURROUND
VIDEO OUT
EXT
Rear of the home theater unit
§
For SH-FX60 users, do not remove the SH-FX60T transceiver card from the home theater unit. Refer to page 4, �Pairing your SB-FX80 wireless sound system with the SH-FX60 wireless system (not included)�.
Connecting the AC cord and setting the sound level
Connect the AC cord to the wireless sound system.
Raise the antenna mast for best reception.
Lo Hi SOUND I/D SET
AC IN ~
Lo Hi SOUND I/D SET
AC IN ~
Soft
Loud The primary sound level can be set here. � You can set the switch to �Hi� to boost the overall volume of an external device (e.g. MP3 player) that has low output power when connected to the MUSIC PORT on the wireless sound system.
AC power supply cord
Lo Hi SOUND
To household AC outlet (AC 120 V, 60 Hz)
Making the wireless link
Refer also to the operating instructions for your home theater unit.
1 2
Turn on your home theater unit.
� Ensure the wireless sound system is plugged into the AC outlet.
Select �MAIN SET� or �MUSIC PORT� on the wireless sound system.
SELECTOR MAIN SET: Select to enjoy audio from your home theater unit.
POWER OFF: Select to turn off the wireless sound system. MUSIC PORT: Select to enjoy audio from the MUSIC PORT on the wireless sound system.
Power indicator [AC IN] This indicator lights when the unit is plugged into the AC outlet.
AC IN
SELECTOR
MAIN SET POWER OFF
MUSIC PORT
MUSIC PORT Allows you to connect and enjoy music from an external device (e.g. MP3 player). � Set the selector on the wireless sound system to MUSIC PORT. � To avoid distorted sound, make sure that any equalizer function of your external device is turned off. � Plug type: �3.5 mm (1/8 z) stereo mini plug e.g. External device (not included) Reduce the volume before connecting.
Lighting Ring The light goes out when the unit is in standby mode, or turned off.
3 4
Check the wireless link indicator on the home theater unit.
The wireless link indicator (e.g. � [W] � or LED) should light up on the home theater unit. � If the indicator is flashing, refer to page 8, Troubleshooting guide.
Start play on the home theater unit.
Conserving power The wireless sound system consumes a small amount of power when it is in standby mode. To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.