- One way only - FX65/FX66 signal flow - FX65/FX66 only
ADC
MCU EEPROM
BB
BB
DAC
CH2 IN
TX Type A
CH2 OUT
RX Type 1
� Type A transmitter uses one ADC (Analog to Digital Converter) and transmits audio through Channel 2. Type 1 receiver (Rx) uses one DAC and output audio through Channel 2. The firmware (that is downloaded to EEPROM IC) multiplexes which channel to listen to (in this case Channel 2 since type A is transmitting from channel 2 In) by setting the baseband accordingly.
EEPROM MCU