Remove any pots and pans being stored
in the oven.
NOTE: You can clean the broiler pan
and grid in the oven if you have first removed most of the soil by hand-cleaning or in a dishwasher. If most of the soil is not removed, too much smoking will occur. Wipe out any loose soil or grease. This will help reduce smoke during the cleaning cycle. Remove the oven racks from the oven if you want them to remain shiny. You can clean the oven racks in the Self-Cleaning cycle, but they will become harder to slide. (See page 39.) If you clean racks in the Self-Cleaning cycle, place them on the 2nd and 4th rack guides. (Guides are counted from bottom to top.) Heat and odors are normal during the SelfCleaning cycle. Keep the kitchen well ventilated by opening a window or by turning on a vent hood or other kitchen vent during the cycle.
Personal Injury and Product Damage Hazard
.Do not touch the oven during the SelfCleaning cycle. It could burn you.
l
l
l
l
Do not use commercial oven cleaners in your oven. Cleaners could produce hazardous fumes or damage the porcelain finish. Do not leave any foil in the oven during the Self-Cleaning cycle. Foil could burn or melt and damage the oven surface.
l
l
l
l
stay locked until the oven is cool enough to safely open. Wait until it moves freely. Do not block the vent during the SelfCleaning cycle. Air must move freely for best cleaning results. Do not leave plastic utensils near the vent. They may melt. Do not use the oven light during the Self-Cleaning Self-Cleaning of the bulb. cycle. Use during the cycle will shorten the life
NOTES: Do not force the Lock Lever. You could l
bend or break it. The lever is designed to
Setting
the controls
1. Make sure the clock is set to the correct
time of day. (See �Setting the clock� on page 12.) 2. Move the Lock Lever all the way to the right-the Clean position.
3. Set the cleaning cycle.
To start cleaning immediately: Push the Clean pad. A 3-hour SelfCleaning cycle will be set automatically. �3:OO� with the colon flashing will show on the large display and �cln� will show on the small display. TIME CLEAN (on right side) and CLEAN (on left side) will light up.