3.1 Connect the base station 1 Place the base station in a central location near the telephone line socket and electricity socket.
3.1.2 Connect the line cord and power cable 1 Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown.
3.1.1 Install the base support 1 Place the base station face down so that you can see the bottom of the base station. 2 Attach the base support to your base station by fitting the tabs of the base support into the corresponding slots on the base unit.
2 Connect the other end of the line cord to the
3 Push into place until a click sound is heard.
Bottom of the base support
4 To remove, simply pull the base support away
from the base unit.
telephone line socket and the other end of the power cable to the electricity socket. Note The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket. Warning Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range and sound quality. Buildings with thick internal and external walls may impair transmission of signals to and from the base. Warning The base station does not have an ON/OFF switch. Power is applied when the power adaptor is plugged into the unit and connected to the electricity socket. The only way to power down the unit is to unplug the power adaptor from the electricity socket. Therefore, ensure that the electricity socket is easily accessible.
