|
|
|
Usuarios conectados
Actualmente hay 6043 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Front Surround
Sub Woofer Center
ORDER NO.
RRV3035
SPEAKER SYSTEM
S-DV424
FOR PRECAUTION OF REASSEMBLY AND DISASSEMBLY
CS Assy ( Subwoofer ) The grille assy is attached to the cabinet by press-fitting with adhesive. To detach it, pry it open by inserting a flat blade screwdriver into backside of it. To attach it, clean the pressfitting part and apply a bit of adhesive. Then press it to the bafle. The subwoofer is attached to the baffle by 6 external screws. To detach it, unfasten those screws. CS Assy ( Front Speaker ) The grille assy is attached to the cabinet by press-fitting. To detach it, remove the top board by inserting a flat blade screwdriver into the cabinet upper side. Then pry it open by inserting a flat blade screwdriver between the grille and the cabinet. The speaker unit is atached to the cabinet by 4 internal screws. To detach it, first two screws of a connection part with a SP stand are removed. Next the screw of a front cabinet is removed and the hexagon socket screw of a top plate is removed. And the screw which is fixing the SP unit is removed and a cable is removed. When attaching it, face its terminal toward the input terminal.
XCN
CS Assy ( Surround Speaker ) The grille assy is attached to the cabinet by its bosses. To detach it, remove the stand by inserting a flat blade screwdriver into the cabinet lower side. Then pry it open by inserting a flat blade screwdriver into the grille slot. The speaker unit is attached to the grille by 4 external screws. To detach it, first remove the rear cabinet Then remove the cable. When attaching it, face its terminal downward. CS Assy ( Center Speaker ) The grille assy is attached to the cabinet by its bosses. To detach it, remove the top board by inserting a flat blade screwdriver into the cabinet upper side. Then pry it open by inserting a flat blade screwdriver between the grille and the cabinet. The speaker unit is attached to the cabinet by 4 internal screws. To detach it, first unfasten screws of the bottom stand. Next remove screws for the cabinet and SP unit. Then remove the cable. When attaching it, face its terminal toward the input terminal.
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION
PIONEER CORPORATION 2004
T � ZZE SEPT. 2004 Printed in Japan
|
|
|
> |
|
