TOSHIBA SD-P1880SE
Manual de Servicio

1.3 The DVD drive does not work. When the DVD drive does not work after the power is turned on, check the following items and repair or replace the defective parts. (1) Press the DISC cover switch and turn on the power. Then check whether or not the optical pick-up lens of the DVD drive lights. CAUTION: Visible laser radiation when open and interlock defeated. Do not stare into Laser beam. The optical pick-up lens lights dim: It is caused by deterioration of the optical pick-up lens. Replace the DVD drive. The optical pick-up lens does not light: Check the connectors of the FPC with DVD drive. Also check the connection to the main board and to the DVD drive. Loose connection is found. Connect FPC with DVD drive to Main Board firmly, and then check the operation of the DVD drive again. The DVD-FPC is broken. Replace the DVD drive. Other than the above. Replace the DVD drive or the main board. (2) Insert a DVD disc and turn on the power The DVD drive does not work: The motor of the DVD drive or the main board is defective. Replace the DVD drive or the main board. The DVD drive works but the initializing operation of the optical pick-up lens does not start or abnormal noise sound: The DVD drive is defective. Replace the DVD drive. 1.4 The operation of the DVD player stops at initializing display. If the DVD player does not work after the initializing screen is displayed, check the indication on the screen. Then repair the defect according to it. (1) Insert a DVD disc and close the DISC cover, and turn on the power. Then check the LCD screen or TV connected by AV cable. The message �loading� is not displayed or the operation stops at the message �Loading�. Since the DVD drive or the main board is defective, check in the following order: 1) DVD drive 2) Main board The message �CHECK DISC� is displayed. Check the DVD disc for fingerprints, dirt, etc. If the DVD disc is OK, then check the following items: 1) Check the FPC with DVD drive If a loose connection, connect it firmly. If it is damaged, replace the DVD drive. 2) Other than above For other cases, replace the unit in the following order: DVD drive (defective optical pick-up) Main board