|
No hay comentarios de productos.
SECTION 1 DISASSEMBLY
1-1. U BOARD REMOVAL
1 Open these hinge covers (F) and (R) by the
� screw driver and so on. * When open the hinge cover (R), these claws in figure would be break so replace new parts. Hinge cover (F)
Hinge cover (R)
Claws
Shield case U
6 Remove the U board
in the direction of allow.
5 Three screws
(+BVTP 3 x 8)
2 Two screws
(+PS 4 x 6) Cushion
CN404 CN406 CN405
CN402
4 Base 3 Five screws
(+KTP 3 x 14)
SDM-N50R(E)
1-1
|
