|
No hay comentarios de productos.
SD-AT100W
From (1) <The "1" key of the remote controller is pushed.> DVD laser lights, the spindle motor rotates and the pickup moves to the outer periphery. 30000001 000000DD
Note: Not to face the light of the laser squarely, caution!
<The "1" key of the remote controller is pushed.> DVD laser off, CD laser on, spin kick, sled outer periphery feed ErrDisplay0 ErrDisplay1 30000001 000000CD <The "1" key of the remote controller is pushed.> Laser off, spin kick, sled outer periphery feed ErrDisplay0 ErrDisplay1 30000001 00000000 <The "1" key of the remote controller is pushed.>
It is returned to the Dynamic test.
<Disk is put, and the "2" key of the remote controller is pushed.> *It is usually returned in power source off for the state. STEP TEST 30000201 00000000 STEP TEST 3000E201 000000EE
Focus on
When a disk is not in.
The "PLAY" key input. STEP TEST 30000202 00000000 RF gain adjustment, Track on
The "PLAY" key input. STEP TEST 30000203 00000000 Focus gain adjustment
The "PLAY" key input. STEP TEST 30000204 00000000 Track gain adjustment
The "PLAY" key input. STEP TEST 30000205 00000000 Focus balance adjustment
The "PLAY" key input. STEP TEST DD000210 00000000
(In case of CD) STEP TEST END After TOC Reading, CD000210 ******** Follow-up play condition (******** is sub-Q.)
STEP TEST DD000211 00000000 The "PLAY" key input. STEP TEST END DD000212 ******** (******** is the sector ID.) The "Stop" key of the remote controller is pushed. It is returned to the Dynamic test. To (2) Focus balance of the layer 1, follow-up play condition after focus gain adjustment
� 21 �
|
