Su carrito de compras está vacío
 
English Polski Spanish 
Buscar un manual
 

(p.Ej. AA-V20EG JVC, ZX-7 Sony)
PayPal 1000+ rating Secure, Encrypted Checkout.
 
Usuarios conectados
Actualmente hay 5797 visitantes online.
Productos
Información
Destacado
Inicio >> SHARP >> SD-AT1000H Manual de Servicio
 
 0 artículo(s) en Su carrito 

SHARP SD-AT1000H
Manual de Servicio


¡Twitee acerca de este producto y obtenga $1.00 de crédito en la tienda para uso!
  • Contiene diagramas del circuito
  • Descargable
  • Formato PDF
  • Manual completo
  • Idiomas: English
Precio: $4.99

Descripción del SHARP SD-AT1000H Manual de Servicio

Manual de servicio completo en formato digital (archivo PDF). Los manuales de servicio por lo general contienen diagramas de circuitos, tarjetas de circuitos impresos, consejos para reparación, diagramas de cableado, diagramas de bloque y lista de refacciones. El Manual de Servicio (a veces llamado Manual de Reparación) es usado principalmente por los técnicos.

Si tan solo quiere saber cómo utilizar su televisión, reproductor de vídeo, reproductor de mp3, etc. Quizá lo que necesita es el Manual del Propietario. Después de colocar la orden le enviaremos las instrucciones de descarga a su dirección de e-mail.

The manual is available in languages: English

Not yet ready
You must purchase it first

Opiniones de los clientes
No hay comentarios de productos.

TEXT_PDF_SNIPPET
SD-AT1000H

WAVEFORMS OF 1-BIT CIRCUIT
2.00V/div AD IC Output 2.00V/div + Side
2.00 V/div 2.00 V/div LEVEL SHIFT OUT
T

1 2
5V

T

2

5 6

DEAD TIME

1

- Side 500 ns/div Amplitude from 0 to 5 V 194.545465 µs 520 mV
50.0 ns/div 0.0 s -12.30 V Dead time is generated by level shift input. Leading edge is delayed at CR, passing R at DI. Set value: 20 - 25 nsec.

ZOOM UP

2.00 V/div

2.00 V/div

10.0 V/div

10.0 V/div

3
2

+ FETOUT + SIDE
2

11
AD IC NF IN

T

12
1

- SIDE

1

4
500 ns/div 194.545465 µs -12.30 V
500 ns/div Waveforms before low-pass filters at both ends of the speaker. H-bridge may be considered as BTL. However, here and at the gate drive, dead time is not observed; since bootstrap operates based on output, DEAD TIME part is in floating condition. The waveform on the HIGH side shows that only the booted voltage lowers. 194.545465 µs -12.3 V

In partial pressure OUT, 4 to 7 V amplitude of GND reference is observed. In IC of 75 kohms, the reference is 2.5 V because of VREF. Due to imaginary GND of operational amplifier inside IC, the waveform cannot be monitored. This waveform is partial pressure OUT.

� 42 �

Quizás también quiera comprar

$4.99

SDAT1000H SHARP
Manual de Usuario

Manual del propietario completo en formato digital. El manual estará disponible para descarga como …
>
Parse Time: 0.169 - Number of Queries: 100 - Query Time: 0.047