|
|
|
Usuarios conectados
Actualmente hay 5775 visitantes online. |
|
Productos
|
|
Información
|
|
Destacado
|
|
|
 |
|
|
No hay comentarios de productos.
Loading batteries
Operating with the remote control
Point the remote control at the remote sensor and press the buttons.
1
Open the cover.
30°
30°
Within about 7 m (23 feet)
2
Insert batteries (AAA size).
Distance: About 7 m (23 feet) from the front of the remote sensor Angle: About 30° in each direction of the front of the remote sensor Make sure to match the + and � on the batteries to the marks inside the battery compartment. * Do not expose the remote sensor of the DVD video player to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the DVD video player via the remote control.
3
Close the cover.
Notes on the remote control � Direct the remote control at the remote sensor of the DVD video player. � Do not drop or give the remote control a shock. � Do not leave the remote control near an extremely hot or humid place. � Do not spill water or put anything wet on the remote control. � Do not open the remote control. Notes on batteries Improper use of batteries may cause battery leakage and corrosion. To operate the remote control correctly, follow the instructions below. � Do not insert batteries into the remote control in the wrong direction. � Do not charge, heat, open, or short-circuit the batteries. Do not throw batteries into a fire. � Do not leave dead or exhausted batteries in the remote control. � Do not use different types of batteries together, or mix old and new batteries. � If you do not use the remote control for a long period of time, remove the batteries to avoid possible damage from battery corrosion. � If the remote control does not function correctly or if the operating range becomes reduced, replace all batteries with new ones. � If battery leakage occurs, wipe the battery liquid from the battery compartment, then insert new batteries.
Introduction
15
|
|
|
> |
|
