Timer (Continued)
Other basic operations
To change the settings change the source or volume Action Repeat steps 1 to 4 and 6 on page 11. 1) Press [�PLAY/REC] to clear the timer indicator from the display. 2) Make changes to the source or volume. 3) Perform steps 5 and 6 on page 11. Press [CLOCK/TIMER] repeatedly to select �PLAY or �REC. Press [�PLAY/REC] to clear the timer indicators from the display.
Sound adjustment
check the settings (when the unit is on or in standby mode) cancel
Note � The play timer and record timer cannot be used together. � The play timer will start at the preset time, with the volume increasing gradually to the preset level. � The record timer will start 30 seconds before the set time with the volume muted. � The timer comes on at the set time every day if the timer is on. � The unit must be in the standby mode for the timer to function. � If you turn the unit off and on again while a timer is functioning, the �nish time setting will not be activated. � If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, activate the equipmentʼs play mode and increase the volume. (See the portable audio equipmentʼs instruction manual.)
Selecting sound effects
You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect.
Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting. HEAVY � CLEAR � SOFT � VOCAL � EQ-OFF
Setting HEAVY CLEAR SOFT VOCAL EQ-OFF Effect Adds punch to rock Clari�es higher frequencies For background music Adds gloss to vocal No effect
Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1
Press [BASS] or [TREBLE] to select your desired setting.
Setting BASS TREBLE Effect For lower pitch sound For higher pitch sound
2
Press [5] or [�] to adjust the level.
OR To adjust bass or treble using the main unit. Turn [BASS] or [TREBLE] clockwise to increase the level. Turn [BASS] or [TREBLE] counter-clockwise to decrease the level.
RQTV0097
Note The tone level can be varied within -3 to +3.
