A Demo function
When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting �DEMO ON�.
Press and hold [STOP 7, �DEMO].
The display changes each time the button is held down.
DEMO OFF DEMO ON
While in the standby mode, select �DEMO OFF� to reduce power consumption.
B Setting the time
B
1 24 3
This is a 12-hour clock.
1 2
Press [y] to turn the unit on. y Press [SHIFT] + [CLOCK/TIMER] to display �CLOCK�.
Every time you press the button:
CLOCK PLAY Original display
REC
3 4
Within 5 seconds Press and hold [4/REW/4] or [3/FF/¢] to set 4 3 the time. Press [SHIFT] + [CLOCK/TIMER].
1 2 3 4
SHIFT
Displaying the clock: Press [SHIFT] + [CLOCK/TIMER]. The clock is shown for about 5 seconds. Note The clock may lose or gain some time over a period. Readjust if necessary.
CLOCK/ TIMER
C Convenient functions
4/REW 3/FF
To dim the display panel Press [DIMMER].
SHIFT
CLOCK/ TIMER
The display brightness will be reduced except for [AC IN] indicator. To cancel, press [DIMMER] again.
C
DIMMER
To mute the volume Press [MUTING].
To cancel, press [MUTING] again. Muting can also be cancelled by lowering the volume all the way to �--dB�. When the system is turned off, the muting operation will be automatically cancelled.
