HOW TO OPEN THE DISC TABLE WHEN POWER SWITCH TURNS OFF
loading panel assy
B 2 Draw out the loading panel assy in the direction of arrow B.
cover (CAM)
1 Insert a tapering driver in the hole at the bottom of the unit, turn the cover (CAM) fully in the direction of arrow A. A
tapering driver
OPTICAL PICK-UP SERVICE POSITION Place the insulator on the MAIN board, then install the base unit (DVBU4C or DVBU4D) on it as shown in the figure.
DVBU4C: Except AEP (Silver type) DVBU4D: AEP (Silver type)
