SECTION 2 DISASSEMBLY-1
Note: When the panel (loading) ass�y of this set is closed, you cannot confirm whether the disc and stabilizer ass�y are loaded inside or not. Accordingly, perform �Removal of Loading ass�y at Power ON/OFF� (see pages 12 and 13) to remove the disc and stabilizer ass�y, if loaded.
Note: Follow the disassembly procedure in the numerical order given.
U.S.A and Canadian Models only
REMOVAL OF LOADING ASS�Y AT POWER ON.
CAUTIONLaser radlation when open. DO NOT STARE INTO BEAM.
3-976-231-01
3 stabilizer ass�y
This caution label is located on the rear enclosure.
panel (loading) ass�y
4 disc
2 Press the eject button to open the panel (loading) ass�y.
1 Turn on the power .
5 four hexagon socket bolts (M4 � 8)
5 four hexagon socket bolts (M4 � 8)
8 loading ass�y section A
7 connector (CN503)
$
6 Place the front side of loading ass�y on the step at the rear side of front panel, and raise the rear side of loading ass�y in the direction A.