General information
IMPORTANT Before using the FM headphone for the �rst time, please ensure that the batteries are fully charged for about 16 hours.This will guarantee a longer operating lifetime of the batteries.
Congratulations!
You have just bought the most sophisticated FM wireless stereo sound system. This system uses the latest FM wireless technology, which gives you complete freedom of movement while enjoying your favorite music and movies. No more inconvenience from cables or headphone wires! To ensure you get the best performance from your FM wireless stereo sound system please read this manual carefully. IMPORTANT Read these instructions.All the safety and operating instructions should be read before using the wireless headphone system. Check if the voltage indicated on the type plate of the adapter corresponds to the local mains voltage before connecting to the mains power supply. Remove the batteries from the headphone�s battery compartment and disconnect the adapter from the mains if the system is not in use for a long period. Prevent �re or shock hazard: do not expose this equipment to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. Radio equipment for wireless audio applications is not protected against disturbance from other radio services.
Bene�ts of Philips latest RF/FM wireless technology
Wireless transmission The FM transmitter transmits the stereo audio signal from your audio or video source to your FM headphone without wires. Wide transmission range Your FM headphone can receive signals up to 100 meters away. High-frequency radio system The FM headphone set uses a high radio frequency as the signal carrier, ensuring a very clear, sharp reception. Mute function Reduces the noise disturbance when the sound signal is too low or not available. Surround Sound The FM headphone features SRS headphone� to enjoy full surround experience without disturbing others. Automatic power on/off indicator The FM transmitter automatically switches on and starts transmitting when audio signals are detected at the audio input (red LED). When no audio signals are detected the FM transmitter automatically switches off after a few minutes. Automatic tuning The FM headphone automatically tunes to the right transmission frequency if you push the tuning button.
