SAT-W60 SECTION 3 SYSTEM SELF TEST
SELF TEST:
1. From home page go to [settings]. 2. Go to [system test]. a. Connect a phone line to the phone jack on the back of the unit. b. Connect both tuners to a SAT signal. c. Make sure that the CAM card is in. 3. Press [Run Test]. This test checks both tuner's signal and that the modem detects a dial tone. Also, it checks that the CAM card is inserted and valid. Test will show the serial number on the card. 4. Go to [Receiver Info] from the same system test menu. This provides the following information on the box: � Manufacturer: Sony Model number: � Serial number: � Client software: � Boot rom version: � SSID: 5. To show the date the box was last upgraded along with the version, select [Upgrades] from the SAT receiver information menu. 6. Go to the settings menu and select [Hooking Up] 7. Go to [Signal Strength] This will show the signal strength for each tuner. It is also possible to change transponder numbers to verify both even and odd transponders.
