Presetting radio broadcasts
by remote control only There are two methods of presetting stations. Automatic presetting : All the stations the tuner can receive are preset. Manual presetting : You can select the stations to preset and the order they are preset in. Up to 12 stations each can be set in the FM and AM bands.
TUNE MODE
REW/3 CLEAR
FF/4
MUTING FM MODE/BP REV MODE SOUND EQ
A Automatic presetting
Do the following once each for FM and AM. Preparation: Tune to the frequency where presetting is to begin (z page 15).
Press and hold [PROGRAM].
A
PRGM
Release the button when frequency begins to change. The tuner presets all the stations it can receive into the channels in ascending order. When finished, the last station memorized is tuned in.
Manual presetting
Preset the stations one at a time.
B
Radio operations
1 Press [TUNER] to select �FM� or �AM�. 2 Press [PROGRAM] then press [g, REW/3] or [f, FF/4] to tune to the require station. 3 Press [PROGRAM] then press [g, REW/3] or [f, FF/4] to select a channel. 4 Press [PROGRAM].
2 1
TUNE MODE
REW/3 CLEAR FF/4
The station occupying a channel is erased if another station is preset in that channel.
B Selecting channels
Press [TUNER] to select �FM� or �AM�.
The unit comes on automatically. Every time you press the button: FMGAM � To enter channel 10 or over. Press [j], then the two digits.
MUTING FM MODE/BP REV MODE SOUND EQ
Press the numbered buttons to select the channel.
3
Adjust the volume.
On the main unit 1 Press [TUNER/BAND] to select �FM� or �AM�. 2 Press [TUNE MODE] to select �PRESET�. 3 Press [g/REW/3] or [4/FF/f] to select the preset channel.
